1991 LARSEN & CARLSEN 28 M SANDDREDGER

PWC-/Jetboote

LARSEN & CARLSEN

28 M SANDDREDGER

Gebraucht

Sand dredger for use in gravel pit. Hull: Length 28.3 m x Width 3.97 m - and transport height approx. 3 m when the upper part of the console with the wire play is "cut off". (extension piece for the hull included, see pictures). Has been sandblasted and primed and painted in 2017. Wire games: 4 pieces to navigate. Engine: Caterpillar C15 - was changed to a new one approx. 8 years ago and has only driven 6300 hours!. Fuel tanks: 2 pieces of 6500 liters each, but currently a tank of 700 liters (for a day's work) and two compressors on board are used, which suck the fuel in from shore (this method avoids oil spills and environmental damage, in the event of a leak in the fuel hose). The work with the sand suction can be controlled both manually and automatically, which is controlled via vacuum and pressure. Suction pump: Larsen og Carlsen 14" inch in good condition (With loose replaceable "innards/rotor and diaphragm" which is easy to change and maintain without great costs) - and flushing pump/flushing system for flushing head – Working capacity is approx. 200-250m3 of clean gravel and stone per hour. 5 pieces are included: 12 m x 0.406 m tubes, each tube is mounted on 2 pieces of floating pontoons and each has 2 walkways (NB!: The additional tubes and pontoons shown in the pictures not included!!!). Suction depth can be increased by fitting additional pipes (you can purchase them yourself). See more pictures and information - as well as other auctions at