2024 DEUTZ / GARDNER DENVER TD 2.9 L4 T4F / D807 Used Andere zum verkauf2024 DEUTZ / GARDNER DENVER TD 2.9 L4 T4F / D807 Used Andere zum verkauf
Bilder(1)

2024 DEUTZ / GARDNER DENVER TD 2.9 L4 T4F / D807

Andere
Preis auf Anfrage 
Mietpreise:
Verfügbarkeit anfragen

Kraft Tank

Kontakt:David Gutgesell

Kansas City, Kansas, USA 66115

besuchen sie unsere webseite (Öffnet in einem neuen Tab)

Vermitungs Kontakt Information

Kraft Tank

Kontakt:David Gutgesell

Kansas City, Kansas, USA 66115

besuchen sie unsere webseite (Öffnet in einem neuen Tab)

Allgemein

Kategorie
Andere
Jahr
2024
Hersteller
DEUTZ / GARDNER DENVER
Modell
TD 2.9 L4 T4F / D807
Seriennummer
29L4/701050263
Zustand
Gebraucht
Bestandsnummer
SKIDMOUNTBLOWERPACK
Beschreibung
The Deutz Diesel, w/D807 Bare Drum, Skid Mounted Blower Pack TD 2.9 L4 T4F is a robust and efficient 2.9L, 4-cylinder turbo engine with 260 Nm torque. Meets U.S. EPA Tier 4 Final and European COM IIIb standards for emissions. Our Deutz Diesel, w/D807 Bare Drum, Skid Mounted Blower Pack has a TD 2.9 L4 T4F. This engine has a 2.9-liter displacement, four cylinders arranged in a vertical in-line configuration, and a turbocharged aspiration. Key Specifications of the Deutz Diesel Skid-Mounted Blower Pack General Physical Data: Cylinders: 4 Cylinder arrangement: Vertical in-line Bore: 92 mm Stroke: 110 mm Total displacement: 2.90 liters Compression ratio: 17.4:1 Combustion system: 1600 Bar CR, Direct injection Aspiration: Turbocharged Emissions equipment: External Cooled EGR, Aftertreatment DOC only Performance Data: Peak torque: 260 Nm at low idle speed of 900 rpm Max torque bending @ housing: 900 Nm Max force @ flywheel: Contact Engineering for details Fuel consumption @ max rating: 17.5 l/h Fuel consumption @ peak torque: 13.1 l/h Engine power (kW) at different RPMs: 54.0, 55.4, 55.4, 55.4 at 2200, 2300, 2500, 2600 RPM respectively Engine power (Hp) at different RPMs: 72.4, 74.2, 74.2, 74.2 at 2200, 2300, 2500, 2600 RPM respectively Please note that specific applications and conditions may require consulting the engineering department or contacting the manufacturer for more details.